 |
Hot Plate, Countertop, Dual 9" Element, 208/240v, Each |
 |
Wells Manufacturing Co.
Thick, flat bottom, heavy-duty countertop hot plate delivers heat fast and efficiently. Has two 9" diameter, solid cast iron elements designed for stock pot heating. An upper-temperature safety thermostat is built in to prevent overheating. Control knobs are front mounted with a protective guard ring to help prevent accidental temperature changes. Stainless top and sides with 4" adjustable legs. Infinite control switch with positive "off" position controls the elements. Cord not included; consult an electrician for proper hard wire installation. UL, NSF. One year parts and labor warranty. |
|
 |
Hot Plate, Countertop, Single 6" Element, 120v, Each |
|
Wells Manufacturing Co.
Delivers heat fast and efficiently. The six inch diameter, flat, spiral elements allow for more surface contact. The element are self cleaning. Drip tray is chrome plated and removable for easy cleaning. Infinite control switch with positive off position controls the elements. Control knob is front mounted with a protective guard ring to help prevent accidental temperature changes. UL, NSF. A one year warranty against defects covers parts and labor. Ideal for pan frying, saut�ing, and warming. |
|
 |
Hot Plate, Portable, Butane, Each |
|
Iwatani International Corp.
A lightweight and reliable portable gas range that is suitable for a wide variety of applications - tableside cooking, small meal preparation, camping, RVs, boats and many other uses. Screw-in permanent brass burner. Heavy-duty pan support. Equipped with an automatic Piezo-Electric ignition for matchless lighting. It also has a plastic case for easy carrying and storage. An automatic safety shut-off device ensures steady worry-free performance. Efficient, high-power heat production at 10,000 BTU/h, with gas consumption of 207 g/hr (approximately 1 hour 20 minutes per cannister). |
|
 |
Hot Plate, Portable, Cast Iron, Electric, 120v, Each |
|
Cadco Ltd.
Hot plate with 7-1/8" diameter cast iron element. Signal light glows only during heat cycle. Easy to clean stainless steel housing. Infinite heat control. 120v., 1500 watts. |
|
 |
Ice Cream Spade, Black Handle, Each |
|
Admiral Craft
Heavy 18-8 stainless steel blade with sure-grip black bakelite handle. |
|
 |
Ice Machine Installation Kit with 115v. Wire, Each |
|
Marshall Webb Co.
These Ice Machine Installation Kits have been developed and put together by Marshall Webb Co. They were designed to facilitate and reduce labor by providing all needed components for proper installation. It is always recommended to have a licensed plumber do all installation work, not only for quality assurance but to prevent warranty issues later. If you're replacing a prior ice machine, it is important to install a new inlet and drain system, and not to reuse the old one. This kit is only good for Scotsman and Manitowoc Commercial Ice Machines and, unfortunately, will not work on residential units. If you would refer to the picture, here's what is included in this kit:- 1. Box with Item Number.
- 2. PVC fittings for drain connections.
- 3. PVC glue.
- 4. 10 ft. of 3/4" PVC in three sections.
- 5. PVC connection to ice machine with attached vent.
- 6. Installation Instructions in English and Spanish.
- 7. 7 ft. of three-strand 12 AWG electrical wire with wire nuts and capture terminal on ground wire.
- 8. 10 ft. of 3/8" plastic water line.
- 9. 7/16" threaded inlet water adapter to 3/8" plastic water line.
- 10. Scotsman inlet water flare connection to 3/8" plastic water line.
- 11. Manitowoc inlet NPT water connection to 3/8" plastic water line.
|
|
 |
Ice Machine Installation Kit with 220v. Wire, Each |
|
Marshall Webb Co.
These Ice Machine Installation Kits have been developed and put together by Marshall Webb Co. They were designed to facilitate and reduce labor by providing all needed components for proper installation. It is always recommended to have a licensed plumber do all installation work, not only for quality assurance but to prevent warranty issues later. If you're replacing a prior ice machine, it is important to install a new inlet and drain system, and not to reuse the old one. This kit is only good for Scotsman and Manitowoc Commercial Ice Machines and, unfortunately, will not work on residential units. If you would refer to the picture, here's what is included in this kit:- 1. Box with Item Number.
- 2. PVC fittings for drain connections.
- 3. PVC glue.
- 4. 10 ft. of 3/4" PVC in three sections.
- 5. PVC connection to ice machine with attached vent.
- 6. Installation Instructions in English and Spanish.
- 7. 7 ft. of three-strand 12 AWG electrical wire with wire nuts and capture terminal on ground wire.
- 8. 10 ft. of 3/8" plastic water line.
- 9. 7/16" threaded inlet water adapter to 3/8" plastic water line.
- 10. Scotsman inlet water flare connection to 3/8" plastic water line.
- 11. Manitowoc inlet NPT water connection to 3/8" plastic water line.
|
|
 |
Ice Mold, Bride and Groom, Each |
|
Carlisle Food Service
A quick and easy way to turn any table into a showpiece. Simply fill mold with water, freeze and cut open the mold. Feature's patented EZCut Bead and Contracting Cone Base. One time use. Instructions included with every mold. Flower trim not included. |
|
 |
Ice Mold, Dolphin, Each |
|
Carlisle Food Service
A quick and easy way to turn any table into a showpiece. Simply fill mold with distilled water, freeze and cut open the mold. Feature's patented EZCut Bead and Contracting Cone Base. One time use. Instructions included with every mold. |
|
 |
Ice Mold, Swan, Each |
|
Carlisle Food Service
A quick and easy way to turn any table into a showpiece. Simply fill mold with water, freeze and cut open the mold. Feature's patented EZCut Bead and Contracting Cone Base. One time use. Instructions included with every mold. |
|
 |
Ice Scoop Holder, 12 oz Scoop Size, Stainless, Each |
|
Infra Corp.
Holder S/S for 12 oz. ice scoops. |
|
|
Ice Scoop Holder, 58 oz Scoop Size, Stainless, Each |
|
Infra Corp.
Holder S/S for 58 oz. ice scoops. |
|
 |
Ice Scoop Holder, 64 oz Scoop Size, Stainless, Each |
|
Infra Corp.
Holder S/S for 64 oz. ice scoops. |
|
 |
Ice Scoop Holder, Guardian System, Each |
|
San Jamar Inc.
This unique scoop design prevents hand contact with ice or other foods during use. Two Germ Guards protect foods from thumb and knuckle contact. Guardian holder isolates the scoop from the ice or other foods, preventing contamination. |
|
| |
|
